Factory directly supply Filtration A Diatomite - 4New LC Series Precoating Filtration System – 4New

Short Description:

Product Detail

Feedback (2)

We can easily usually fulfill our respected customers with our very good top quality, very good price tag and excellent support due to we have been more expert and much more hard-working and do it in cost-effective way for Grinding Oil Filtration, Media Filtration, Oil Mist Filtration Systems, If you are looking for Good Quality at a good price and timely delivery. Do contact us.

Factory directly supply Filtration A Diatomite - 4New LC Series Precoating Filtration System – 4New Detail:

Main Technical Parameters

Equipment model	LC150 ~ LC4000
Filtering form	High precision precoating filtration, optional magnetic pre separation
Applicable machine tool	Grinding machineLathe Honing machine Finishing machine Grinding and polishing machine Transmission test bench
Applicable fluid	Grinding oil, emulsion
Slag discharge mode	Air pressure dewatering of wear debris, liquid content ≤ 9%
Filtering accuracy	5μm. Optional 1μM secondary filter element
Filter flow	150 ~ 4000lpm, modular design, larger flow, customizable(based on 20 mm viscosity at 40 ° C)²/S, depending on the application)
Supply pressure	3 ~ 70bar, 3 pressure outputs are optional
Temperature control capability	≤0.5°C /10min
temperature control	Immersion refrigerator, optional electric heater
electric control	PLC+HMI
Working power supply	3PH，380VAC，50HZ
Control power supply	24VDC
Working air source	0.6MPa
Noise level	≤76 dB

Product Function

LC precoating filtration system achieves deep filtration through precoating of filter aid to realize solid-liquid separation, reuse of purified oil and deoiling discharge of filter residue. The filter adopts backwashing regeneration, which has low consumption, less maintenance and does not affect the quality of oil products.

● Technological Process
User dirty oil reflux → magnetic pre separator → high precision pre coating filtration system → temperature control of liquid purification tank → liquid supply system for machine tool

● Filtration Process
The returned dirty oil is first sent to the magnetic separation device to separate ferromagnetic impurities and then flow into the dirty liquid tank.
The dirty liquid is pumped out by the filter pump and sent to the precoating filter cartridge for precision filtration. The filtered clean oil flows into the liquid purification tank.
The oil stored in the clean liquid tank is temperature controlled (cooled or heated), pumped out by liquid supply pumps with different flow and pressure, and sent to each machine tool through overhead liquid supply pipeline.

● Precoating Process
A certain amount of filter aid is added into the mixing tanx by the feeding screw, which is sent to the filter cylinder through the filter pump after mixing.
When the precoating liquid passes through the filter element, the filter aid is continuously accumulated on the surface of the filter screen to form a high-precision filter layer.
When the filter layer meets the requirements, switch the valve to send the dirty liquid to start filtration.
With the accumulation of more and more impurities on the surface of the filter layer, the filtering amount is less and less. After reaching the preset differential pressure or time, the system stops filtering and discharges the waste oil in the barrel into the sump.

● Dehydration Process
The impurities and dirty oil in the sump tank are sent to the dewatering device through the diaphragm pump.
The system uses compressed air to press out the liquid in the cylinder and return to the dirty liquid tank through the one-way valve on the door cover.
After the liquid removal is completed, the pressure of the system is relieved, and the solid falls into the slag receiving truck from the liquid removal drum.

Customer Cases

Junker Grinder
Bosch
Mahle
Great Wall Motor
Schaeffler
SAIC MOTOR

Product detail pictures:

Related Product Guide:

Good quality comes initial; company is foremost; small business is cooperation is our business philosophy which is frequently observed and pursued by our business for Factory directly supply Filtration A Diatomite - 4New LC Series Precoating Filtration System – 4New , The product will supply to all over the world, such as: Russia, Houston, Casablanca, As an experienced factory we also accept customized order and make it same as your picture or sample specifying specification and customer design packing. The main goal of the company is to live a satisfactory memory to all the customers, and establish a long term win-win business relationship. For more information, please contact us. And It is our great pleasure if you like to have a personally meeting in our office.

Cellulose Filters