Factory Free sample Fluid Transfer Pump - 4New FMO Series Filter Medium For Oil Mist – 4New

Advantage

Low resistance.
Large flow.
Long life.

Product Structure

1. Frame: aluminum frame, galvanized frame, stainless steel frame, thickness customized according to customer requirements.
2. Filter material: ultra-fine glass fiber or synthetic fiber filter paper.
Appearance size:
Can be customized according to customer requirements.

Performance Parameters

1. Efficiency: Can be customized
2. Maximum operating temperature:<800 ℃
3. Recommended final pressure loss: 450Pa

Features

1. High dust capacity and low resistance.
2. Uniform wind speed.
3. It can be customized for fire and temperature resistance, chemical corrosion resistance, and difficult for microorganisms to breed.
4. It can be customized according to non-standard equipment.

Precautions for Installation

1. Clean before installation.
2. The system shall be cleaned by air blowing.
3. The purification workshop shall be thoroughly cleaned again. If a vacuum cleaner is used for dust collection, it is not allowed to use an ordinary vacuum cleaner, but must use a vacuum cleaner equipped with an ultra clean filter bag.
4. If it is installed in the ceiling, the ceiling shall be cleaned.
5. After 12h of commissioning, clean the workshop again before installing filter.

Please consult our sales department for specific oil mist filter element specifications. Non standard Products can also be ordered specially.