How to select chip handling lifting pump?

Chip Handling Lifting pumps are an essential part of any machining operation that generates chips, such as milling or turning. These pumps are used to lift and convey chips away from the machining area, preventing them from causing damage or interfering with the machining process. There are many different types of chip handling lifting pumps to choose from, each with its own unique features and capabilities. In this article, we discuss how to choose the best chip handling lifting pump for your machining operation.

4New PD Series Chip Handling Lifting Pump5

The first thing to consider when choosing a chip handling lifting pump is the type of machine tool coolant pump you are using. Most chip handling lift pumps require coolant to function properly, so it is important to choose a pump that is compatible with your machine tool coolant pump. If your machine tool coolant pump is a high pressure pump, you will need a higher flow chip handling lifting pump. On the other hand, if your machine tool coolant pump is a low pressure pump, you can use a chip handling lifting pump with a lower flow rate.

Next, consider the types of chips produced in your machining operation. If you are handling larger, heavier chips, you will need a chip handling lifting pump with higher lift capacity. If your chip is smaller and lighter, you can use a low volume pump. It’s also important to consider the shape and size of the cuttings – if they are irregularly shaped or have sharp edges, you may need to choose a pump with a stronger design.

Another consideration when selecting a chip handling lifting pump is the total pump capacity. The flow rate will determine how quickly the pump can move chips away from the machining area. If you have a high production machining operation, you will need a pump with a higher flow rate to keep up with the amount of swarf being produced. However, for smaller operations, slower flow rates may be sufficient.

Finally, it is important to consider the type of material the pump is manufactured from. Some chip handling lifting pumps are made of plastic, while others are made of metal or even stainless steel. The type of material you choose will depend on the specific requirements of your operation. If you’re handling harsh chemicals or abrasive materials, you may need a metal or stainless steel pump to withstand the wear and tear of the environment.

In conclusion, selecting the proper chip handling lifting pump is critical to the success of any machining operation. By considering the factors discussed in this article, including compatibility with your machine coolant pump, lift capacity, flow rate, and materials, you can select a pump that will meet your unique operating requirements. Be sure to research the different pump options, read reviews,and consult with experts in the field to ensure you make the choice that best suits your specific processing needs.

4New PDN type chip handling lifting pump can disperse aluminum alloy chips and cut off aluminum alloy long chips.

4New PDN-Series-Chip-Handling-Lifting-Pump1

Post time: Apr-30-2023