4Sabon LC Series Precoating Filtration System

Takaitaccen Bayani:

● Ana amfani da shi sosai, musamman don sarrafa ƙarfe na simintin launin toka, carbide da ƙarfe mai sauri.

● Har zuwa 1μm don mayar da asalin launi na ruwan sarrafa.

● Abubuwan tacewa an yi su ne da ragar ƙarfe kuma ana iya amfani da su na dogon lokaci.

● Tsari mai ƙarfi da abin dogara, ƙananan filin bene.

● Cikakken aiki ta atomatik, ci gaba da samar da ruwa ba tare da rufewa ba.

● Hadaddiyar firji don sarrafa daidai yawan zafin ruwan sarrafa ruwa.

● Yana ba da babban ƙarfin tacewa na cikakken layin samarwa kuma ana iya amfani dashi azaman na'ura ɗaya ko tsarin samar da ruwa na tsakiya.


Cikakken Bayani

Babban Ma'aunin Fasaha

Samfurin kayan aiki Saukewa: LC150-LC4000
Tace form High madaidaici precoating tacewa, na zaɓi Magnetic pre rabuwa
Kayan aikin inji mai aiki Injin niƙaLathe
Injin honing
Injin gamawa
Injin niƙa da goge goge
benci gwajin watsawa
Ruwan da ya dace Nika mai, emulsion
Yanayin fitarwa Matsewar iska na tarkacen lalacewa, abun ciki na ruwa ≤ 9%
Tace daidaito 5 μm.Na zaɓi 1μm na biyu tace
Tace ruwa 150 ~ 4000lpm, ƙirar zamani, mafi girma kwarara, customizable (bisa 20 mm danko a 40 ° C) ² / S, dangane da aikace-aikace)
Matsin kayan aiki 3 ~ 70bar, 3 matsa lamba fitarwa ne na zaɓi
Iyawar sarrafa zafin jiki ≤0.5°C/10min
sarrafa zafin jiki Firinji na nutsewa, na zaɓin dumama lantarki
sarrafa wutar lantarki PLC+HMI
Wutar lantarki mai aiki 3PH, 380VAC, 50HZ
Sarrafa wutar lantarki Saukewa: 24VDC
Tushen iska mai aiki 0.6MPa
Matsayin amo ≤76 dB

Ayyukan samfur

LC precoating tacewa tsarin cimma zurfin tacewa ta hanyar precoating na tace taimako gane m-ruwa rabuwa, sake amfani da tsarkakewa mai da deoiling fitarwa na tace saura.Tace tana ɗaukar farfadowa na baya, wanda ke da ƙarancin amfani, ƙarancin kulawa kuma baya shafar ingancin samfuran mai.

● Tsarin Fasaha
Mai amfani da datti mai reflux → Magnetic pre SEPARATOR → babban madaidaicin tsarin tacewa pre shafi → sarrafa zafin jiki na tankin tsarkakewa → tsarin samar da ruwa don kayan aikin injin

● Tsarin tacewa
An fara aika dattin man da aka dawo da shi zuwa na'urar rabuwar maganadisu don ware ƙazanta na ferromagnetic sannan kuma ya kwarara cikin tankin ruwa mai datti.
Ruwan datti yana fitar da famfon mai tacewa kuma a aika shi zuwa kasuwar tacewa don tantancewa.Mai tsaftataccen mai da aka tace yana gudana cikin tankin tsarkakewa.
Man da aka adana a cikin tankin ruwa mai tsafta ana sarrafa zafin jiki (sanyaye ko mai zafi), ana fitar da shi ta famfunan samar da ruwa tare da kwarara daban-daban da matsa lamba, sannan a aika zuwa kowane kayan aikin injin ta bututun samar da ruwa.

●Tsarin riga-kafi
Ana ƙara wani takamaiman adadin taimakon tacewa a cikin tanx ɗin da ake hadawa ta hanyar dunƙulewar ciyarwa, wanda aka aika zuwa silinda mai tacewa ta cikin famfon tacewa bayan haɗawa.
Lokacin da precoating ruwa ya wuce ta cikin tace kashi, da tace taimakon da ake ci gaba da tara a kan saman da tace Layer don samar da high-madaidaici Layer tace.
Lokacin da layin tacewa ya cika buƙatun, canza bawul don aika dattin ruwa don fara tacewa.
Tare da tarin ƙazantattun abubuwa da yawa a saman farfajiyar tacewa, adadin tacewa yana ƙasa da ƙasa.Bayan isa ga matsa lamba daban-daban na saiti ko lokaci, tsarin yana dakatar da tacewa kuma yana fitar da mai da ke cikin ganga cikin tudu.

● Tsarin Rashin Ruwa
Ana aikawa da ƙazanta da ƙazantaccen man da ke cikin tankin daɗaɗɗen ruwa zuwa na'urar cire ruwa ta famfon diaphragm.
Tsarin yana amfani da iska mai matsa lamba don fitar da ruwa a cikin silinda kuma komawa zuwa tankin ruwa mai datti ta hanyar bawul mai hanya ɗaya akan murfin ƙofar.
Bayan an gama cire ruwan, matsa lamba na tsarin ya sauƙaƙa, kuma ƙaƙƙarfan ya faɗi cikin babbar motar da ke karɓar ruwa daga ganga mai cire ruwa.

Harsunan Abokin Ciniki

Junker grinder
Bosch
Mahle
Babban Motar bango
Schaeffler
MOTOR SAIC

  • Na baya:
  • Na gaba:

  • Ku rubuta sakonku anan ku aiko mana